PRODUCT OVERVIEW
6 MultiConnect
®
Dragonfly
TM
MTQ-MNG6-B02 Device Guide
Chapter 1 – Product Overview
Overview
The Dragonfly
TM
(MTQ) System-on-Module (SoM) offers developers the functionality of an on-board cellular radio
all-in-one compact design. The Dragonfly provides a practical solution to the market's demand for a smaller, low-
power module.
The Dragonfly and maintains interoperability with legacy systems that use a 40-pin connector and forward
mounting hole. All Dragonfly software is open source.
Important: The MTQ-MNG6-B02 must be configured for Cat M1 use only. Use AT#WS46=0 to ensure the device
is in Cat M1 mode.
Documentation
This documentation is on the product page at https://www.multitech.com/brands/multiconnect-dragonfly-nano.
Document Description Part Number
MTQ-MNG6 Device Guide This document. Provides hardware specifications and
developer information.
S000809
Universal Developer Kit 2.0
Developer Guide.
Provides information for using the developer board. S000779
USB Driver Installation Guide Provides instructions on how to install Windows USB driver. S000616
AT Commands Manual Provides AT commands and parameters used to configure
your device.
80617ST10991A
Note: Additional documentation is available on the mbed site at https://os.mbed.com/platforms/MTS-
Dragonfly/ and at www.multitech.net. See Getting Started for details.
Product Build Options
Product Description Region
MTQ-MNG6-B02 Embedded LTE Cat M1 with GNSS and 2G fallback Global
Developer Kit
MTUDK2-ST-CELL.R1 Developer Kit for Dragonfly devices. Global
Note:
These units ship without network activation. To connect them to the cellular network, you need SIM cards
from your service provider.
The complete product code may end in .Rx. For example, MTQ-MNG6-B02.Rx, where R is revision and x is
the revision number.
All builds can be ordered individually (-SP) or in 50-packs.
To Next Page
Loading...