Chapter 3 – Using the Web Management Software
MultiModem rCell User Guide 63
Action: Enter the action that the packet filter executes if the rule matches any traffic traversing the firewall. Types
of actions defined are:
● Accept: Allows/accepts all packets that match this rule.
● Reject: Blocks all packets that match this rule. The host sending the packet is informed that the packet has
been rejected.
● Drop: Blocks all packets that match this rule, but the host is not informed; that is, this is a silent drop.
● Log: Packets matching the rule; that is, the corresponding source address, destination address, and service are
logged.
Add Button: Click the Add button. The defined packet filter rule is added and appears at the bottom of the screen.
To Next Page
Loading...
