CALIBRATION
35
display (OSD) mode. Once the OSD is visible on the Cell, the calibration mode
is entered by pressing 'd' on the keyboard. With the calibration mode enabled,
one can press shift+'c', to start the automatic calibration. During the automatic
calibration you should place the calibration sheet on top of the display.
The automatic calibration process takes at most 3 minutes, after which the cali-
bration sheet can be removed from the display.
On-line Resources
Calibration
For calibration instructions:
https://cornerstone.multitouch.fi/calibration
Troubleshooting
For troubleshooting instructions:
https://cornerstone.multitouch.fi/troubleshooting
Support
For online support on MultiTouch Cells:
https://cornerstone.multitouch.fi/support-form
(requires logging in to the website)
SDK Tutorials
For information regarding the SDK:
https://cornerstone.multitouch.fi/sdk-tutorials/sdk-tutorials
To Next Page
Loading...
Need help?
General