Start-up
Setting up the machine and starting it up
11.06.2014 37
¾ Place filling plates under the base plate so that the base plate
is even.
¾ Hold the liquid container (e.g. an oil bottle) under the drain
opening.
¾ Unscrew the screw plug. To do so, turn the screw plug anti-
clockwise.
¾ Only drain so much oil until the oil level is roughly in the middle
of the oil sight glass.
¾ Screw the screw plug tightly in the drain opening. To do so,
turn the screw plug clockwise.
¾ Wipe off and remove any oil from the machine.
To Next Page
Loading...
