Maintenance
Repair counter-pressure ba
11.06.2014 65
¾ Smooth the Teflon tape flat.
7.5 Open and close the housing
7.5.1 Open housing
¾ Open the chamber lid. Open the chamber lid more than half way
so that it remains open.
– The chamber lid remains open in the middle position.
¾ Take all the objects out of the chamber apart from the sealing bar.
¾ Close the chamber lid. So that the chamber lid remains closed,
first open it as far as the limit stop and then close it.
¾ Unscrew the two screws at the rear of the machine. Turn these
screws anticlockwise.
To Next Page
Loading...
