EasyManua.ls Logo

multivac P300 - Shutdown, Transport, and Storage; Machine Shutdown Procedure; Safe Machine Transport

multivac P300
90 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Shutdown, transport, storage
80 11.06.2014
9 Shutdown, transport, storage
Info
Observe the safety instructions, see Section 1 "S
AFETY".
9.1 Shutting down the machine
¾ Close the chamber lid.
¾ Close the stop-cock for the gas supply, if part of the machine.
¾ If present, remove the gas hose from the inert gas connection.
¾ Disconnect the machine from the mains electricity.
¾ Clean machine and then preserve it, see Section 6 "CLEANING".
9.2 Transporting the machine
9.2.1 Transporting the machine
¾ Wear personal protective equipment.
WARNING
Injury hazard!
The machine is heavy.
Carrying the machine can cause injuries.
¾ Have a second person assist you.
NOTICE Danger of material damage!
At an inclination of more than 15°, the oil in the vacuum pump
shifts.
The air de-oiling elements will get wet from the oil and become inef-
fective. This will damage the vacuum pump.
¾ Transport and set the machine down as horizontally as possi-
ble.
¾ Do NOT tilt the machine.
¾ Carefully raise the machine.
¾ For machine dimensions and weight, see "Technical specifica-
tions".
¾ Transporting the machine
¾ Avoid severe jolts.

Table of Contents

Related product manuals