Operation
Perform pump protection function
48 11.06.2014
¾ To start the machine after it has been switched on, firmly press
the opened chamber lid shut against the resistance by pressing
the middle of its front edge.
– The pump protection function starts.
– The "pump protection" icon flashes.
– The vacuum pump runs for 20 minutes.
– The chamber lid opens automatically.
– The display goes dark.
¾ To abort the pump protection function, press the <Machine control
On/Off> key, while the vacuum pump is running.
– The chamber lid opens automatically.
– The display goes dark.
To Next Page
Loading...
