Page
10
of
18
IMC01 Frequently Asked Questions
Version 1.05
Figure 2- 12 Using a coin to adjust the gap
The IMC01 needs different gaps for different currencies, but otherwise should stay consistent. Having the
correct feeding gap adjusted will ensure smooth operation as well as a trouble-free experience. You may need to
do some trial and error before getting it perfectly smooth.
You may also wish to make his adjustment over time, When the banknotes are not fed smoothly through the
machine or several error messages are occurring often such as: Bill Double Error, Chain Notes Error or Half
Notes Error.
Other reasons that might require to readjust the feeding gap are:
- The counting of new or mint condition bills.
- The counting of poor or badly deteriorated bills.
- Polymer notes and paper-made notes counted together.
2.7. When and how to do I calibrate the CIS sensor?
CIS calibration is often needed when there are many errors during the banknote counting process.
1) Please enter the main menu. Next, go to the service menu with the password “9999”, as shown in the
following figures.
Figure 2- 13 Main Menu
To Next Page
Loading...
