Transport, storage and disposal
4 Transport, storage and disposal
4.1 Transport
Weight specifications (→ Individual order documentation).
4.1.1 Unpacking and inspection on delivery
1. Unpack the pump/aggregate on delivery and inspect for
transport damage.
2. Report any transport damage to the manufacturer without
delay.
3. Dispose of packaging material according to local regula-
tions.
4.1.2 Lifting
DANGER
Death or crushing of limbs caused by falling loads!
Use lifting gear appropriate for the total weight to be trans-
ported.
Fasten the lifting gear as shown in the illustrations below.
Do not stand under suspended loads.
Fig. 7 Fastening the lifting gear to the pump aggregate
Fig. 8 Fastening the lifting gear to the pump
Lift the pump/aggregate appropriately.
EN – 02 BA-2005.07 NPC series 13
To Next Page
Loading...