Munsch NPC Series - Page 5

Table of contents
List of tables
Tab. 1 Target groups and their duties . . . . .. . . . . . . .. 6
Tab. 2 Other applicable documents and their
purpose ....................................... 6
Tab. 3 Warning labels and consequences of
disregarding them ............................ 7
Tab. 4 Symbols and their meaning ................. 7
Tab. 5 Technical terms and their meaning . . .. . . . . . 7
Tab. 6 Quenching – variants and characteris-
tics ............................................. 12
Tab. 7 Foreign blocking – variants and
characteristics ................................ 12
Tab. 8 Action to be taken for pump shutdowns .... . 23
Tab. 9 Measures depending on pum ped medium
behavior ....................................... 23
Tab. 10 Actions to be taken after prolonged shutdown
periods ........................................ 23
Tab. 11 Actions for return ............................. 26
Tab. 12 Fault/number assignment . . . .. . . . . . . .. . . . . . . 31
Tab. 13 Troubleshooting list .......................... 33
Tab. 14 Designations of components listed with part
numbers ...................................... 35
Tab. 15 Ambient conditions ........................... 40
Tab. 16 Operating parameters for sealing medium in
open flow system ............................. 40
Tab. 17 Noise pressure level . .... . . . . ... . . . . . ... . . . . . 40
Tab. 18 Steel/cast pairing .. . . . . . .. . . . . . .. . . . . . . .. . . . . . 41
Tab. 19 Socket head cap screw 914.1 - steel/steel
pairing ......................................... 41
Tab. 20 Lubricating greases .......................... 42
Tab. 21 Minimum amounts for grease lubrica-
tion ............................................ 42
Tab. 22 Lubricating oils ............................... 42
Tab. 23 Minimum amounts for oil lubrication .. . . . . . . 42
Tab. 24 Detergents .................................... 42
Tab. 25 Socket loads – forces . . .. . . . . . .. . . . . . . .. . . . . . 42
Tab. 26 Socket loads – torques .. . . . . .. . . . . . . .. . . . . . . 42
Tab. 27 Replacement parts for 2 years' continuous
operation ...................................... 43
EN – 02 BA-2005.07 NPC series 5