Munters Communicator 2.0 - 5.2.1 Editing Alarm Settings

© Munters AB, 2019 19
4 Using Communicator to Manage Controllers
•
Introduction to Controller Management
•
Activating the Account
•
Connecting the Communicator 2.0 to RotemNet Web
•
Attaching the Farm to a Group
4.1 Introduction to Controller Management
When using the Communicator 2.0 to connect to your farm(s), you must:
•
Connect (activate) the Communicator 2.0 to a RotemNet Web account
•
Create a group
•
Define user rights
A group is the virtual device used to manage your farms. Using the RotemNet Web application, the
group manager defines each user's permissions (which farms he can see and what functions he can carry
out).
Figure 18: Group Example
As an example, an account manager has sent up two Groups and wants to add three different users to
his account. Any combination is possible.
•
User 1 is assigned access rights to Farm 1.
•
User 2 is assigned access rights to Farm 2.
•
User 3 is assigned access rights to Farm 1 and Farm 2.
•
In addition, User 1 is also assigned access rights to Farm 3, which is in an entirely different group.