© Munters AB, 2019 43
•
Receiving the Message
•
Responding to the Alarm Message
6.7.1.1 Receiving the Message
The following illustrates the sequence of ALARM messages:
"Good <Morning / Afternoon / Evening> farm <#> active alarm.
Please, press 1 to listen."
"House <#> has <#> alarm message<s>."
• Alarm messages for the first house are played and then the following options are available:
Acknowledge
Replay house message
Play next house
message
End call
•
Enter password (if acknowledging for the first time this call) and press
.
•
"Please wait… Reset for house
<#>
successful.
<Next Message / Goodbye>
."
•
When you hear "Please wait" press
to access the ALARM OPTIONS MENU.
6.7.1.2 Responding to the Alarm Message
• System reports alarm and then offers the following options:
Disable alarms
Return to house
messages
Replay alarm message
End call
NOTE:
Disabling alarms disables them until 12:00 PM the following day.
• "Disable
<confirmed / failed>
!" message is repeated and returns to House Alarm Messages
NOTE:
If at any time an incorrect key is pressed or if nothing is pressed, the system repeats itself three
times and then ends the call.
6.7.2 R
ESPONDING TO A
T
EXT
M
ESSAGE
This section details how to respond to a text message sent from Communicator 2.0 to a mobile phone.
The response can reset a siren, an alarm, or acknowledge the messages.
•
Resetting the Siren
To Next Page
Loading...