Munters Communicator 2.0 - 5.2.5 Disable and Clear Alarms; 5.3 Responding to Alarms; 5.3.1 Responding to Audio Messages

© Munters AB, 2019 25
Figure 26: Scan Initiation
After scanning the controllers, the web application appears (Figure 15).
4.4 Attaching the Farm to a Group
•
No Existing Groups
•
Groups Exist
4.4.1 NO EXISTING GROUPS
1. If there are no existing groups for this farm, the following screen appears:
Figure 27: No Existing Group Screen
2. Write the name of the farm group that you want to create and click Attach to Group.
4.4.2 GROUPS EXIST
If the farm is part of a group or if the owner has created groups do one of the following:
•
Check the radio box next to the group to which you want to attach your farm and click Attach
to Group.
Figure 28: Attach Farm to Group Screen