© Munters AB, 2019 48
8 Appendix A: Changing the Battery
Munters recommends installing a new battery every two years.
•
Change the battery between flocks or herds.
•
Order a new battery from your dealer.
To replace the battery:
1. Disconnect the AC power.
2. On the rear panel, switch the battery to Off.
3. Disconnect all cables connected to the Communicator 2.
4. If the unit is mounted on a wall, take it down and place it on a table.
5. Remove the six screws indicated and lift the Communicator 2’s top.
6. Using a box spanner, remove the four screws indicated (and their clamps).
To Next Page
Loading...
