© Munters AB, 2019 24
Figure 23: Scan Initiation
After scanning the controllers, the web application appears:
Figure 24: Scanned System (example only)
4.3.2 L
OGIN TO AN
E
XISTING
A
CCOUNT
1. Connect the Communicator 2.0 to your LAN (i.e. your modem).
2. In your browser, enter the Communicator 2’s URL address (Munters supplies this information).
The Activation screen appears.
Figure 25: Login screen
3. Under Login to your account, fill in the fields and click Login.
4. In the following screen, click Start scan.
To Next Page
Loading...
