Munters Communicator 2.0 - 3.4 Mounting the Communicator 2.0

© Munters AB, 2019 9
Table 2: Component Description
Number
Description
Notes
1
Power Supply
2
Battery (refer to Appendix A: Changing the Battery, page 48)
3
LED Board
4
Line Modem Card
This card is under the LED
board
5
Not used
6.1
Communication Card, RS485
OR
6.2
Communication Card, RS232
7
Board
8
Cell Modem
9
SSD Card
10
Main CPU
3.4 Mounting the Communicator 2.0
Figure 3: Dimensions (mm)
•
Mount the unit using the four supplied screws.