MX
2
Plus Dehumidification system
Ā®Munters
4.
Furthermore,
in
the case
of
cooling coils, clean the drip tray
and
siphon for the condensation water
once
per
year.
Note
that siphons need to be refilled with water after the winter season.
4.3 Direct expansion refrigeration
Applies
to
units with
DX
refrigeration.
A detailed description
of
the
DX
cooling function
and
the corresponding
components
is found
in
the
DX
Supplement.
Important
information for the operator
of
the
DX
refrigeration system
is
found in the
DX
Supplement.
The
mandatory
Commissioning
and
Service
Logbook
is also available
in
the
DX
Supplement.
LL
WARNING!
Strict legal requirements
apply
for the operation
of
DX
cooling systems containing fluorinated greenhouse gases.
Read
more in the
DX
Supplement.
4.4 Electric heater
All electric heaters have minimally two high temperature cut-outs, an automatic resetting function and can
be manually reset.
The
high temperature cut-out can be reset
on
the cover
of
all
the electric heaters.
The
electric heater power is
produced
on
a time basis using pulse-pause technology.
When
heat is required
the inbuilt regulation equipment signals for full power (pulse) for a set time, depending
on
the heat
requirement.
If
the heat requirement increases, the pulse time increases
and
the pause time decreases.
When
the heat requirement is reduced, the pulse time decreases
and
the pause time increases.
To Next Page
Loading...
