EasyManua.ls Logo

Munters MX2 Plus - Warnings; Warranty; Inspection of delivery

Munters MX2 Plus
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MX
2
Plus Dehumidification system
®Munters
1.3 Warnings
Information
about
dangers are
in
this manual indicated by
the
common
hazard symbol:
~
WARNING!
Indicates a possible hazard that can result
in
severe personal injury or
death.
~
CAUTION!
Indicates a possible hazard that can result
in
damage
to
the unit or other property, or cause environmental
damage.
NOTE! Highlights supplementary information for optimal
use
of
the
unit.
1.4 Warranty
The
warranty is based
on
the
terms
of
sale and delivery ofMunters.
The
warranty
is
not
valid
if
repairs
or
modifications are carried
out
without
the
written agreement
ofMunters,
or
if
the
unit
does
not
operate
under
the
conditions agreed with Munters. Damages resulting from negligence,
poor
maintenance
or
failure
to
comply with
the
recommendations
will
not
be
covered by
the
warranty.
It
is a condition
of
the warranty
that
the unit for
the
full warranty period is serviced and maintained by a
qualified Munters engineer
or
Munters approved engineer. Access
to
specific
and
calibrated test equipment
is necessary.
The
service
and
maintenance
must
be
documented
for
the
warranty
to
be
valid.
The
warranty is limited
to
a free exchange
of
parts
or
components
which have failed
as
a result
of
defects
in
materials
or
workmanship.
Commissioning/
Start-up inspection "S" by Munters is mandatory
to
validate
the
full warranty.
Always contact Munters for service
or
repair.
Operating
faults can
occur
if
the
unit
is maintained
insufficiently
or
incorrectly.
1.5 Inspection of delivery
Inspect
the delivery and
compare
with the delivery note,
order
confirmation
or
other
delivery
documentation. Make sure
that
everything is included
and
nothing
is damaged.
Contact
Munters immediately
if
the delivery is
not
complete
or
damaged
in
order
to
avoid installation
delays.
Remove all packaging material from the unit,
and
make sure
that
no
damage has occurred during
transportation.
Any
visible damage
must
be
reported
in writing
to
Munters within 3 days
and
prior
to
installation
of
the
unit.
Dispose
of
the
packaging material according
to
local regulations.

Related product manuals