EasyManua.ls Logo

Murphy ML2000 - Page 32

Murphy ML2000
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Section 40 00-02-0994
2016-06-28 - 32 -
Warnings and Shutdowns: establish parameters for the:
Low Fuel Level Warning: sounds a warning when the fuel level reaches the set lower limit parameter.
Factory set to 10%
Low Fuel Level Shutdown: shuts down the engine when the fuel level reaches the set lower limit
parameter.
Factory set to 5%
High Battery Warning: sounds a warning when the charge on the battery reaches the set higher limit
parameter.
Factory set to 16.00 V.
Low Battery Warning: sounds a warning when the charge on the battery reaches the set lower limit
parameter.
Factory set to 10.00 V.
Weak Battery Warning: sounds a warning when the charge on the battery reaches the set parameter for
weakness.
Factory set to 11.00 v.
LOP High Speed: the speed setting in which the Low Oil Pressure (LOP) will be active at high speed.
Factory set to 2000 RPM.
LOP Warning/High Speed: the Low Oil Pressure (LOP) setting in which the controller will provide a
warning if dropping below at high speed.
Factory set to 35.00 psi.
LOP Shutdown/High Speed: the Low Oil Pressure (LOP) setting in which the controller will provide a
shutdown if dropping below at high speed.
Factory set to 30.00 psi.
Low Oil Pressure Warning: sounds a warning when the oil pressure reaches the set lower limit parameter
for oil pressure.
Factory set to 15.00 psi.
Low Oil Pressure Shutdown: shuts down the engine when the oil pressure reaches the set lower limit
parameter for oil pressure.
Factory set to 10.00 psi.
High Oil Temp Warning: sounds a warning when the oil temperature reaches the set higher limit
parameter for oil temperature.
Factory set to 210 F.
High Oil Temp Shutdown: shuts down the engine when the oil temperature reaches the set higher limit
parameter for oil temperature.
Factory set to 225 F.
High Oil Pressure Warning: sounds a warning when the oil pressure reaches the set higher limit
parameter for oil pressure.
Factory set to 200.0 psi.
High Oil Pressure Shutdown: shuts down the engine when the oil pressure reaches the set higher limit
parameter for oil pressure.
Factory set to 200.00 psi.
High Engine Temp Warning: sounds a warning when the temperature of the engine reaches the set
higher limit parameter for temperature.
Factory set to 210 F.
High Engine Temp Shutdown: shuts down the engine when the temperature of the engine reaches the
set higher limit parameter for temperature.
Factory set to 225 F.
Low Engine Temp Warning: sounds a warning when the temperature of the engine reaches the set lower
limit parameter for temperature.
Factory set to 32 F.
Underspeed Shutdown: shuts down the engine when the speed reaches the set lower limit parameter for
speed.
Factory set to 0 RPM.