Need help?Do you have a question about the Murphy ML2000 and is the answer not in the manual?
General| Brand | Murphy |
|---|---|
| Model | ML2000 |
| Category | Control Panel |
| Language | English |
Overview of the Murphy Ready to Run Panel and ML2000 controller.
Provides detailed measurements and diagrams for mounting the unit.
Details how to mount the ECU for specific engine models.
Lists available accessories and their part numbers for the ML2000 panel.
Electrical wiring diagram for the 4JJ1T engine harness.
Electrical wiring diagram for the 4LE2 engine harness.
Details the capabilities and flexibility of the MPC-20 controller.
Describes the sequence of machine states for the MPC-20 controller during operation.
Details the function of each button on the MPC-20 control panel.
Instructions on how to navigate and access the MPC-20 controller's menu.
Overview of the primary menu sections like System, Engine, and Input/Output.
Configuration options for date, time, units, brightness, and other system parameters.
User-configurable parameters for engine setup, type, and speed.
Less common user-configurable parameters for engine setup and J1939 settings.
Settings for engine throttling, RPM control, and response rates.
Configuration for digital and analog inputs, and relay/digital outputs.
Overview of available applications like Pump, Irrigation, Compressor, Frost Protection.
Settings for maintaining, deadbanding, and controlling pressure, level, and flow.
Settings for start/stop temperatures and related warnings.
Details the eight automatic start/stop types supported by the MPC-20.
Setup for countdown timers and scheduled start/stop times.
Step-by-step guides for common initial configurations.
Visual examples of MPC-20 screens and status information.
Explains icons indicating warning or shutdown situations on the MPC-20.
Definitions for system settings like Date/Time, Pressure Units, Brightness.
Definitions for engine type, manufacturer, emissions, speed, and warnings.
Definitions for J1939 address, ECU source, crank/clutch settings, and timers.
Definitions for throttle type, RPM step size, deadband, and rate settings.
Definitions for digital, analog, and relay input/output configurations.
Options for communication protocols like PVA, Modbus, and Local Display.
Information on using PowerVision Configuration Studio for controller setup.
Modbus registers for engine state, shutdown status, and warnings.
Modbus registers for pressure, level, flow, versions, and serial number.
Modbus registers detailing various warning statuses.
Details on display, voltage, power consumption, and connections.
Operating and storage temperatures, protection ratings, and vibration specs.
Information on case material and keypad/gasket materials.
To Next Page