A3 Scanner User Manual (PC)
30
We provide you the target image that can be used to
calibrate your scanner, the Reflective IT8. It allows
color matching for photographs and documents and
is used in conjunction with your scanner.
Target Image Handling:
Do not touch the image with your fingers. Handle
it by the edges.
Keep the image away from light when not in use.
This includes sunlight, interior light and light from
the scanner lamp. Long exposure to light will fade
the colors and affect accurate calibration.
Return the calibration image to its protective sleeve
immediately after use.
Store the calibration image by placing it face-
down, away from light, in a cool, dry place.
A good place to store it (both for protection and
ease of memory) is inside the scanner box itself.
Calibrating and Applying
Calibrating the Scanner
Once you have successfully installed the calibration
software, you are ready to calibrate your scanner and
create a scanner profile.
To Create a Scanner Profile:
In Advance:
To ensure the quality of calibration, please do not open
the document cover during calibrating.
1. Make sure that your scanner is properly
connected and powered on.
2. Turn on the PC and launch Windows.
3. Place the appropriate target image face down
in the top center portion of the scanner glass.
Make sure that the target image is correctly
aligned on the scanner glass with the IT8
indicators and TA indicators.
Chapter Three
Calibrator
To Next Page
Loading...
