MUSTOOL MT8206 - Safety Instructions

1
Safety instructions
The MT8206 digital graphical multimeter is designed in accordance with the requirements for the over-voltage
category of CAT II-1000V and CAT III-600V and level 1 pollution protection in IEC1010-1 safety specification.
1. Check the case before use. Do not use the device with damaged case; check for cracks or missing plastic parts.
Check the insulation of the probe and connecting wires. Do not touch the metal part of the probe when using it;
2. Do not operate it in high temperature, humidity, rain and flammable and explosive environment or when the
instrument is wet;
3. Never measure the voltage/current beyond its maximum limits;
Measuring function
Input
Maximum limit
V DC
V/Ω，COM
1000V DC/AC peak, within 10 seconds
V AC
V/Ω，COM
750V DC/AC RMS, within 10 seconds
Hz
V/Ω，COM
380V DC/AC RMS, within 10 seconds
mA AC/ DC
400mA，COM
400mA DC/AC RMS, 250V/500mA fuse
A AC/ DC
10A，COM
10A DC/AC RMS, within 30 seconds, 15 minutes cooling interval,
250V/10A fuse
Ω / /
V/Ω，COM
250V DC/AC RMS, within 10 seconds
Capacitance/mF
V/Ω，COM
250V DC/AC RMS, within 10 seconds