Cautions in using this product 13
It is recommended to use this product once a week. When left unused for a long time, the print head nozzles can get clogged
causing damage.
This product requires daily maintenance.
• Check the nozzle before and after printing.
If nozzle clog is found, conduct a head cleaning.
• Clean the cleaning wiper once a week.
• When this product is not used for a long time (a week or more), conduct a head cleaning once a week.
• Clean its exterior and inside once a month.
• Drain waste ink in the waste liquid tank periodically.
In this product, there are some parts required to be replaced after a long-term use.
• Parts required to be replaced by users: absorption material for the flushing box, cutter
• Parts required to be replaced by service personnel: Various motors, print head
Cautions in using this product
Please use this product periodically
Conduct periodic maintenance
Some parts need to be replaced periodically
To Next Page
Loading...
Need help?
General