EasyManuals Logo

MUTOH VJ-628 ValueJet User Manual

MUTOH VJ-628 ValueJet
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #49 background imageLoading...
Page #49 background image
Replacing ink cartridge 49
3 Emptying waste ink tank
When a certain amount of ink is used, the error LED in the operation panel of this product becomes ON, and a buzzer sounds.
Pour waste ink inside the waste ink tank to PET bottle, and discharge.
Be cautious that ink does not get into your eye or make a contact with your skin. Wear goggles and groves. When
ink gets into your eye or make a contact with your skin, wash with water immediately. If left as it is, it may cause
red eye or light inflammation. If it is necessary, please see your doctor immediately.
Important!
When moving this product, always empty the waste ink tank even if it is for a short distance.
If ink splashes inside the waste ink tank while being moved, it can cause damage.
Steps
[1]
Check the error LED is flashing.
[2]
Launch VSM and display the remote panel.
"Launching/Displaying/Finishing ValueJet Status Monitor (VSM)" on page 9
[3]
Check [Status Information] in the [Printer Status] tab.
A message indicating that the waste ink tank is full is displayed.
[4]
Prepare a container like PET bottle to transfer the waste ink.
Important!
The capacity of waste ink tank is 1500 ml. Make sure to prepare a container that has enough capacity when discharging waste ink.
Emptying waste ink tank
CAUTION

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the MUTOH VJ-628 ValueJet and is the answer not in the manual?

MUTOH VJ-628 ValueJet Specifications

General IconGeneral
BrandMUTOH
ModelVJ-628 ValueJet
CategoryPrinter
LanguageEnglish

Related product manuals