Cleaning of print head circumference 55
Cleaning period:
•Weekly
• When print blurring and dot missing remain after head cleaning is done.
Preparation:
Cleaning stick
Cleaning of print head circumference
Important!
During cleaning, please note the followings.
• Use a cleaning stick in dry condition. If moisten with water or solution, it can cause damage to the print head.
• Do not touch the tip of a cleaning stick with fingers. If sebum is adhered, it can cause damage to the print head.
• Do not reuse a cleaning stick. Dusts can adhere causing damage to the print head.
• Standard cleaning time should be within 5 minutes. If it takes longer, the stick can dry causing damage to the print head.
Steps
[1]
Display the Printing Preferences screen of printer driver.
"Displaying the Printing Preferences screen of printer driver" on page 8
[2]
Click the [Maintenance] tab under the [Utility] tab.
[3]
Click [CR Maintenance].
• The VSM remote panel opens.
Note
• VSM can be launched directly.
"Launching VSM" on page 9
To Next Page
Loading...
Need help?
General