72 Handling messages/error messages
4Troubleshooting
VSM is used to check error/warning when problem happens and to check messages while the product is operating correctly.
The error LED in the operation panel becomes ON (flashes in warning state), and a buzzer sounds.
Handling messages/error messages
Checking message/error/warning
[1]
Launch VSM.
"Launching VSM" on page 9
[2]
Check [Status Info.].
• Message/error/warning contents are displayed.
• When countermeasures are displayed, follow them.
Note
• When the remote panel of VSM is launched, it can be also checked in [Printer Status] - [Status Info.].
• Operations may be temporarily paused when an error occurs. When an error is corrected, it restarts the operation.
Error display of operation panel
[1]
Short press the operation key on the operation panel, when the
buzzer continues sounding.
•The buzzer stops.
[2]
Check error/warning contents with VSM and handle the error/warning.
"Checking message/error/warning" on page 72
Troubleshooting
Press!
To Next Page
Loading...
Need help?
General