- 57 -
OPERATION 4
4
4.4.1. Selecting the display func-
tions
You can select the following functions:
• TOTAL Mileage Counter
• TRIP 1 Mileage Counter
• TRIP 2 Mileage Counter
• Clock
• Chronometer
The TOTAL, TRIP 1 and TRIP 2
functions can be displayed by pres-
sing the engine start button. Pressing
the button repeatedly cycles through
the different functions. Select the
desired function.
The displaying of the chronometer
function is shown in the following
page.
WARNING
The operation must be performed while the engine is
running, the gears are in neutral, the motorcycle is
stationary, and with the feet on the ground. Do not set
the display functions while riding as it may cause
loss of control of the vehicle.
To Next Page
Loading...
