- 59 -
OPERATION 4
4
4.4.2. Setting the measurement units
It is possible to set the measurement units of the
displayed quantities.
WARNING
The operation must be performed while the
engine is running, the gears are in neutral, the
motorcycle is stationary, and with the feet on
the ground. Do not set the display functions
while riding as it may cause loss of control of
the vehicle.
❏ Speedometer (Km/h - Mph)
Repeatedly press the engine start button until the
TOTAL mileage counter is displayed.
Press the SET button; the speedometer unit starts
blinking.
To Next Page
Loading...
