17
EN
hyperion X5 2D/3D - TECHNICAL MANUAL
EN
PC CONFIGURATION
When the installation is over, the window on the side
will appear:
Click on “Close”.
Go to C:\Program Files\Common Files\Pleora\eBUS
SDK path and run “EBusDriverInstallationTool.exe” le,
the screen with the list of network cards available in the
PC will appear:
Only near Intel Pro 1000 board connected to the 3D
panel it is necessary that in “Current Driver” column the
“eBUS Universal Pro Driver” are present. In “Action”
column of the other boards, select “Use manufacturer”
menu and click “Install”:
At the end of installation, click “Close”.
Restart the PC.
After PC restart, make sure that the following settings are correct:
To Next Page
Loading...
