EN
24
14.
AUDIO MULTITASKING
The Audio Multitasking function makes it possible to listen to audio coming from different sources at
the same time.
When the Audio Multitasking function is enabled, phone calls, GPS directions and intercom
conversations can overlap the audio of the FM radio, of the music or of the directions coming from
the GPS app of a smartphone in the background at a lower volume.
The following audio overlaps are possible:
MULTIMEDIA AUDIO FROM THE SMARTPHONE
MUSIC FROM THE SMARTPHONE
Notes
:
• The Audio Multitasking function is compatible with Android devices. On iOS devices, on the other
hand, the use of the Audio Multitasking function is limited.
• The Audio Multitasking function can only be used between N-Com B902 systems.
14.1.
Enabling / disabling the Audio Multitasking function
By default, the Audio Multitasking function is disabled on the device.
It can be enabled / disabled through the Configuration Menu (chapter 6), the N-Com EASYSET
program or the N-Com EASYSET APP.
Once the function has been enabled / disabled, the N-Com system needs to be switched off and then
switched on in order to store the selection.
N.B.
: When the Audio Multitasking function is enabled, the “Music Sharing” function (chapter 10.1) is
temporarily disabled.
N.B.
: When the Audio Multitasking function is enabled, the “Intercom HD” function is temporarily
disabled.
14.2.
Adjusting the volumes
Increasing or decreasing the volume of the foreground audio also increases or decreases the volume
of the background audio.
The volume of the foreground audio can be adjusted through the N-Com system (chapter 4.1).
The volume of the background audio can be adjusted through the N-Com EASYSET APP (with the
Audio Multitasking function enabled). The background volume is pre-set at level 5.
The “Audio Multitasking” function can be enabled / disabled by means of the N-
Com EASYSET program or the N-Com EASYSET APP.
To Next Page
Loading...
Need help?
General
