N-Com B902 User Manual

EN
26
16. INTERCOM
The N-Com B902L system allows communication with other N-Com systems, up to a maximum
distance of about 700 m (in open field, with no obstacles). The range of the communication varies
depending on the N-Com systems used.
N.B.:
The range and quality of the communication may vary significantly depending on the presence
of obstacles, weather conditions, magnetic fields.
16.1. N-Com “600”/”900” Series Intercom pairing up
Important: The procedure described below refers exclusively to the pairing up between the
“600”/”900” series N-Com systems.
• Make sure the systems are turned off.
• Put the systems in “Pairing up” menu: press the “
ON
” key and keep it pressed for 4 seconds, until
you hear the voice announcement “
Pairing up Menu
”.
• On both systems, press the key “” until you reach the option “
Intercom pairing
”.
• On system A, press the key pertaining to the “pre-setting position” where you wish to save
system B.
Pairing up CHANNEL 1
Briefly press “
n
”.
Pairing up CHANNEL 2
Press the “
n
” key twice.
Pairing up CHANNEL 3
Press the “
n
” key three times.
• No key must be pressed on system B.
The Intercom connection with the selected channel is automatically activated at the end of the pair up
procedure.
Through the N
-
Com EASYSET APP, the “
Intercom Easy Pairing
” can be carried out. This
mode allows the N-Com systems to be recognised and stored through a QR code
generated on one’s smartphone.
The Intercom Easy Pairing function is only available for B902 systems.
16.2. Pairing up other N-Com
Important: The procedure described here below refers exclusively to the pairing up of “900” series N-
Com systems with N-Com systems OTHER THAN the “600”/“900” series
1
.
• Make sure the systems are turned off.
• Put B902 system in “Pairing up” menu: press the “
ON
” key and keep it pressed for 4 seconds, until
you hear the voice announcement “
Pairing up Menu
”.
• Put the N-Com system in “Setting” mode: press the “
ON
” key and keep it pressed for 4 seconds,
until the blue LED starts to flash quickly.
• On B902 system, press the key “” until you reach the option “
Pairing up other N-Com
”.
• On B902 system, press the key pertaining to the “pre-setting position” where you wish to save the
other N-Com system.
1
Except for Bluetooth kit and Bluetooth kit2, which are not compatible.

N-Com B902 Specifications

General

Bluetooth version	4.1
Battery life	15 hours
Smartphone connection	Yes
Music sharing	Yes
FM radio	Yes
GPS connection	Yes
VOX	Yes
Waterproof Rating	IP67
Intercom range	700 m
Intercom conference	Up to 4 riders