4-14 Adjustments and Status LEDs
Magnum 4A Control Wiring and Adjustment Manual www.NabcoEntrances.com
Part #C-00084 Rev. 9-09-16
Potentiometer Description
Event Action
Recycle sensitivity needs
adjusting.
X
until all other adjustments
are made.
X When recycle is triggered, door will stop and
coast to a close. Wait at least (5) seconds before
Reactivating.
X
X
• Decreased Recycle Sensitivity.
X
• Increased Recycle Sensitivity.
X
adjusted according to door weight and speed.
X
stop door from opening.
at any instant within
the Swing door cycle. This helps to identify when the Swing door system is functioning properly. Please
see .
Figure 4-4 LED Indicators
DN 0558
Green LED
LED
TRANSFORMER
AUX
PWR
J2
F1
TDAS
SIGNAL
INPUT
TDPG
LCHK
CLOSE
Fuse 1: 0.5A 24 VAC
STOP
OPEN
BCHK
J1
Table 4-3 Status LED Indicators
LED Status Description
Green Indicates door position during an open and closed cycle.
Indicator Action
Fast Flashing Door is opening.
On Solid
Slow Flashing Door is closing.
Off
Red Safety
Swing door cycle.
Indicator Action
Slow Flashing X Door mounted Sensor on Swing side of door is activated.
X
Fast Flashing X
activated.
X
On Solid X
To Next Page
Loading...
Need help?
General
