Nacra F16 - Spipole

NACRA EMPOWERING SAILORS SINS 1975
4.5 spipole
1. Slide the spipole over the spipole pin on the front
crossbar.
Make sure the jibsheet is on top of the spipole
2. Aach the spipole on the spipole outhol-
der
3. Push the spipole gently down in order to
aach the front spipole bridle located on
the front of the spipole on the bridle pin
with the clevispins 3/16 x 3/8.
4. Tie the snuerline in front of the snuer-
ring. The other end must be ed on the
ring at the bridle
The line goes in the slot on the front of
the snuer ring
5. Tie the spipole bridle line in
front of the spipole outholder.
Tie the other end to the rings
at both bridle wires.
Note: F18 infusion
First slide the spipole througt the spipole holder ring .