NACRA EMPOWERING SAILORS SINS 1975
4.6 Jibsheet
1
2
Take the jibsheet small, one carbo 29mm block and a Shackle D 5mm.
Tie one end onto the middle of the 29mm block and the feed the jib-
sheet through the the rst sheave of the double block located on the
traveller of the selacking track.
Feed the line through the carbo 29mm block and through the second
sheave of the double block.
4. The jibsheet small (1) must be on top of the
jibsheet big (2).
5. Loop the end through the block on the
spipole located back of the compression
pole
7. Feed the track travellerline of the jib
through the cleat mounted on the spi-
pole to range the track.
6. Tie the end of the jibsheet small to the 16mm
block already aached at the jibsheet big.
To Next Page
Loading...
