IDENTIFICATION OF CONTROLS
CD 9 REMOTE CONTROL
BATTERY ASSEMBLY
Press in and lift tab to remove battery cover out
of recess.
Press batteries into opening. Ensure correct
tting is observed.
Replace battery cover by aligning and inserting
the two tabs into the holes. Press battery cover
into place until it “clicks” closed.
ON: Switch ON C 568.
CD: Select CD as the active source.
USB: Select USB as the active source.
OPT: Select optical input as the active source.
Not applicable for C 568.
SRC: Toggle to select desired SRC mode. Not
applicable for C 568.
FOLDER [ D/F ] : Select through folder lists.
FILE [ A/S ] : Select through WMA/MP3 les.
ENTER: Select desired folder or WMA/MP3 le.
[ ]: Open or close disc tray.
[ ]: Pause playback temporarily.
0 to 9 NUMBER BUTTONS: Direct-entry of
track or le number.
OFF: Switch OFF C 568.
RAND: Play tracks/les in random mode.
RPT: Repeat track, le or whole disc.
RPT A-B: Setup repeat sequence.
DIM: Reduce, turn o or restore VFD brightness.
FILTER: Select lter number.
SKIP [ ] : Go to next track or le.
SKIP [ ] : Go to beginning of current track/
le or to previous track/le.
SCAN [ ]: Fast reverse/forward search.
[ ]: Start playback.
[ ]: Stop playback.
DISP: Show playback time and other display
information.
PROG: Enter or exit program mode.
CLEAR: Delete programmed track/le.
9
To Next Page
Loading...
