NAD M15 - Assigning A;V Presets; Copying A;V Presets

34
ASSIGNING A/V PRESETS
Link each A/V Preset to a source input to make it easy for you to select the A/V Preset simply
by the press of an HTRM's source input. The following is the procedure for assigning A/V
Presets to a source input:
• Press ENTER from the HTRM remote control, then using the buttons select A/V
PRESETS, and then press the button to enter the A/V PRESETS OSD
• Once in the A/V PRESETS OSD, select the A/V Preset you would like to assign by pressing
A/V PSET and the number on the HTRM remote control. The menu item "CURRENT
PRESET #" will show you the A/V Preset you have selected.
• Using the buttons, navigate to the “PRESET #” you want to assign and then
press the to enter the variable window. Press the navigation buttons to
scroll through the M15’s source input and then press the ENTER button. Continue this
process to assign each preset a source input as per you're A/V system requirements.
COPYING A/V PRESETS
During the naming of any A/V Preset, one may copy an existing A/V PRESET to another. This
is particularly useful when setting up the A/V system for the first time so that one does not
need to setup all speakers' settings for each assignment.
• Press ENTER from the HTRM remote control, then using the buttons select A/V
PRESETS, and then press the button to enter the A/V PRESETS OSD
• Either press A/V PSET and then the number 1 through 5 on the HTRM, or navigate to
the CURRENT PRESET # and using the HTRM's navigation arrows select the A/V
preset. Press ENTER from the HTRM remote control.
• From the HTRM, navigate to the "COPY TO PRESET #" and then press . Then
using the HTRM's arrows select the target A/V Preset number. Press ENTER from
the HTRM remote control.
Notes: The user's calibrated A/V system is always A/V PRESET 1.
The M15 will remember the last selected source-assigned AV Preset, even when
powered OFF from the rear POWER switch.
A/V Preset 1 is the default preset for any source input not assigned to an A/V Preset.
To restore factory default A/V Preset settings; from the M15's front panel simultaneously
press audio and digital for North American defaults, or press video and digital for
European defaults, and then follow the instructions on the VFD in either case.
USING THE M15
Setup
ENGLISH FRANÇAIS
DEUTSCH
NEDERLANDS
ESPAÑOL
ITALIANO
PORTUGUÊS
SVENSKA
A/V PRESETS
LINK TO:
-> PRESET 1 DVD
-> [DEFAULT]
-> PRESET 2 NONE
-> PRESET 3 NONE
-> PRESET 4 NONE
-> PRESET 5 NONE
-> CURRENT PRESET 1
-> COPY TO PRESET 1
A/V PRESETS
LINK TO:
-> PRESET 1 DVD
-> [DEFAULT]
-> PRESET 2 VCR
-> PRESET 3 SAT
-> PRESET 4 CD
-> PRESET 5 NONE
-> CURRENT PRESET 1
-> COPY TO PRESET 1
A/V PRESETS
LINK TO:
-> PRESET 1 DVD
-> [DEFAULT]
-> PRESET 2 VCR
-> PRESET 3 SAT
-> PRESET 4 CD
-> PRESET 5 NONE
-> CURRENT PRESET 1
-> COPY TO PRESET 2
M15 02 23 2006.qxd 3/7/2006 9:06 AM Page 34