30
SOURCE SETUP
INPUT LABEL (SOURCE SELECTION)
To edit the source selection and assignments of audio, video, and user delineable names, first
select the input and then press ENTER on the HTRM. You will note that the M15 will
automatically switch to this source allowing you real-time monitoring of the setup. All inputs
are configurable in the SOURCE SETUP other than ext 7.1 and tape monitor
Note: Assign the ext 7.1 and tape monitor to any video input selection by first selecting
the video input from DVD through to VIDEO 6, and then select the ext 7.1 or tape
monitor input from the M15's front panel (7.1 IN or TAPE 0 on the HTRM remote
control).
RENAME
You may assign a new label to the source inputs. This label will be shown in the VFD as well
as the temporary OSD. There are 8 locations for the available for the following characters;
A-Z, a-z, [,,], ->, <-, -, 0-9, :, ;,<, >, and, ?,
DIGITAL INPUT
The digital assignments available are the same that one can assign via the front panel, but in
this OSD, the assignments are locked in memory;
NONE, COAXIAL 1, COAXIAL 2, COAXIAL 3, COAXIAL 4, OPT 1, OPT 2, OPT 3 and OPT 4.
DEFAULT DIGITAL INPUT ASSIGNMENTS
DVD COAXIAL 1
SAT COAXIAL 2
VCR COAXIAL 3
VIDEO 4 COAXIAL 4
VIDEO 5 OPT 1
VIDEO 6 OPT 2
CD OPT 3
DISC OPT 4
Note: Set DIGITAL INPUT to NONE in the SOURCE SETUP menu for each analog input source
connection.
ANALOG SENS (ANALOG GAIN SETTING)
Analog sensitivity gain settings can be fixed or variable;
0dB, -3dB, -6dB, or AUTO. Generally, for most situations, AUTO is the best setting.
VIDEO TYPE
There are two video types that may be assigned to the A/V sources, CVBS and S-Video. These
video types will be format converted to YUV for MONITOR OUT. There are two high
definition video options assignable to each input, YUV and HDMI For YUV output, the M15
will automatically format convert the CVBS and S-Video to YUV.
Note: The inputs TUNER, DISC, CD, tape monitor and ext. 7.1 cannot be assigned S-
Video nor CVBS video.
For optimal video performance, THX recommends bypassing video conversion
(Composite Video in to Composite Video out, S-Video In to S-Video Out, Component
Video In to Component Video Out).
USING THE M15
Setup
ENGLISH FRANÇAIS
DEUTSCH
NEDERLANDS
ESPAÑOL
ITALIANO
PORTUGUÊS
SVENSKA
To Next Page
Loading...
