NAiS FP Series - Programming Tool Restrictions; Software and Hardware Compatibility; Important Notes on Programming Tools

FP0 RTD Unit
Unit Outline
3. Expansion connector
Connects the expansion unit to the internal circuit of the control unit.
REFERENCE
FP0 Hardware Manual: “Expansion I/O Units”
FP∑User’s Manual: “Expansion”
4. DIN rail attachment lever (one-touch hook)
The unit can be installed to the DIN rail by one-touch operation. The one-touch hook is also
used for installing the unit to the FP0 Slim Type Mounting Plate (AFP0803).
5. Expansion hook
Used to secure expansion units.
3