Nanometrics Trillium Compact - Recording Your Serial Number and IP Address

1.4.1 Recording Your Serial Number and IP Address
Before installing your Trillium Compact seismometer, it is important to record both the serial
number and the IP address of the unit. Both numbers are located on the label.
Keep this information readily available. You will need to reference the serial number when
contacting Technical Support. You will need the IP address of the unit to access its Web
interface. See "Configuring Serial Communications" on page60 for more information.
If the IP address of the unit is not recorded, it can be calculated later using the serial
number. See "Calculating the IP Address" on page61.
Chapter 1 - Getting Started
16889R10 • 2020-11-12 Page 17