3.12 Installation Checklist for the Trillium Compact Vault
seismometer
Use the following checklist to help you verify that you have completed all of the necessary
steps in the installation of your Trillium Compact Vault in a vault.
Installation surface is clear of debris.
Trillium Compact Vault is level.
Trillium Compact Vault is aligned to east-west or north-south.
The feet of the Trillium Compact Vault are locked.
Trillium Compact Vault serial number is noted.
Cable is connected to the Trillium Compact Vault and the digitizer.
Cable is strain-relieved to the installation surface.
Cable is not touching theTrillium Compact Vault case.
Thermal insulation is in place.
Thermal insulation is not touching the Trillium Compact Vault or cables.
If using a rigid-foam insulating box, it is weighted down.
Masses are centered.
Chapter 3 - Installing a Trillium Compact Vault Seismometer
16889R10 • 2020-11-12 Page 48
To Next Page
Loading...