Chapter 2 Installation and BIOS Setup
NI 8352/8353 User Manual 2-20 ni.com
System Event Log/System Event Log (List Mode)
These options display the System Event (SEL) Log and System Event
(SEL) Log in List Mode. The options are SEL (System Event Log) Entry
Number, SEL Record ID, SEL Record Type, Time Stamp, Generator
ID, SEL Message Revision, Sensor Type, Sensor Number, SEL Event
Type, Event Description, and SEL Event Data.
Realtime Sensor Data
This feature displays information from motherboard sensors, such as
temperatures, fan speeds, and voltages of various components.
Security
Use the arrow keys to choose Security from the Phoenix BIOS Setup
Utility main menu. To display security setting options, highlight the setting
using the arrow keys and press <Enter>. This section describes all security
BIOS settings.
Supervisor Password Is:
This item indicates if a supervisor password has been entered for the
system. Clear means such a password has not been used, and Set means
a supervisor password has been entered.
User Password Is:
This item indicates whether a user password has been entered for the
system. Clear means such a password has not been used, and Set means
a user password has been entered.
Set Supervisor Password
To set a supervisor password, highlight Set Supervisor Password and
press <Enter>. When prompted, enter the supervisor password in the
dialogue box, which allows access to the BIOS.
Set User Password
To set a user password, highlight Set User Password and press <Enter>.
When prompted, enter the user password in the dialogue box, which allows
access to the system at bootup.
To Next Page
Loading...
Need help?
General
