National Instruments 8353 User Manual

Chapter 2 Installation and BIOS Setup
NI 8352/8353 User Manual 2-26 ni.com
Installing the Chassis into the Rack
Follow these steps to install the chassis in the rack:
1. Push the inner slides, attached to the chassis, into the grooves of the
outer slide assemblies installed in the rack, as shown in Figure 2-4.
Figure 2-4. Installing Inner Slides into Outer Slides
1 Inner Slides 2 Grooves of Outer Slide Assemblies
1
2

National Instruments 8353 Specifications

General

Brand	National Instruments
Model	8353
Category	Controller
Language	English