National Instruments 8353 User Manual

Appendix B Hardware Configuration
© National Instruments Corporation B-13 NI 8352/8353 User Manual
Upgrading Memory
The mainboard includes four 240-pin ECC DDR-II SDRAM slots with
maximum memory size of 8 GB. Install at least one memory module in
the slots.
Figure B-18 shows the DIMM location on the main board. DIMM1 is on
the top; DIMM4 is on the bottom.

National Instruments 8353 Specifications

General

Brand	National Instruments
Model	8353
Category	Controller
Language	English