Index
© National Instruments Corporation I-9 M Series User Manual
L
LabVIEW documentation, xviii
LabVIEW PDA 8.x, xvii
LabWindows/CVI documentation, xviii
LED patterns
USB-6221 BNC, A-23
USB-6221 Screw Terminal, A-16
USB-6225 Mass Termination, A-44
USB-6225 Screw Terminal, A-38
USB-6229 BNC, A-60
USB-6229 Screw Terminal, A-53
USB-6251 BNC, A-80
USB-6251 Mass Termination, A-85
USB-6251 Screw Terminal, A-72
USB-6255 Mass Termination, A-106
USB-6255 Screw Terminal, A-100
USB-6259 BNC, A-123
USB-6259 Mass Termination, A-128
USB-6259 Screw Terminal, A-115
LED patterns (USB devices), 3-13
Linux, xvii
low impedance sources, 4-8
lowpass filter, analog input, 4-4
M
M Series
and E Series accessories, D-1
differences from E Series, D-1
information, A-1
migrating applications to, D-1
pinout comparison versus E Series, 3-5
specifications, xx, A-1
upgrading to, D-1
Mac OS X, xvii
Measurement Studio documentation, xix
measurements
buffered period, 7-7
buffered pulse-width, 7-5
buffered semi-period, 7-8
buffered two-signal edge-separation, 7-18
choosing frequency, 7-13
frequency, 7-9
period, 7-6
position, 7-14
pulse-width, 7-4
semi-period, 7-8
single period, 7-6
single pulse-width, 7-4
single semi-period, 7-8
single two-signal edge-separation, 7-18
two-signal edge-separation, 7-17
using quadrature encoders, 7-14
using two pulse encoders, 7-17
measuring
high frequency with two counters, 7-11
large range of frequencies using two
counters, 7-12
low frequency with one counter, 7-9
averaged, 7-10
methods, data transfer, 10-4
minimizing
glitches on the output signal, 5-4
output signal glitches, C-3
voltage step between adjacent
channels, 4-10
multichannel scanning considerations, 4-7
multiple device synchronization, 9-3
MUX, 4-1
N
National Instruments support and
services, E-1
.NET languages documentation, xx
NI 6220, A-2
accessory options, A-4
cabling options, A-4
pinout, A-2
specifications, A-4
NI 6221, A-7
To Next Page
Loading...
Need help?
General
