National Instruments NI 6323 - Chapter 3 Connector and LED Information; IO Connector Signal Descriptions

© National Instruments 3-1 X Series User Manual
3
Connector and LED Information
The I/O Connector Signal Descriptions and +5 V Power Source sections
contain information about X Series connector signals and power. Refer to
Appendix A, Device-Specific Information, for device I/O connector
pinouts.
The PCI Express Device Disk Drive Power Connector and RTSI Connector
Pinout sections refer to X Series PCI Express device power and the RTSI
connector on PCI Express devices.
The USB Device LED Patterns section refers to the X Series USB device
READY and ACTIVE LEDs.
I/O Connector Signal Descriptions
Table 3-1 describes the signals found on the I/O connectors. Not all signals
are available on all devices.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com