National Instruments NI PXIe-1085 - Page 54

A-10 | ni.com
Appendix A Specifications
Figures A-1 and A-2 show the NI PXIe-1085 Series chassis dimensions. The holes shown are
for the installation of the optional rack mount kits. You can install those kits on the front or rear
of the chassis, depending on which end of the chassis you want to face toward the front of the
instrument cabinet. Notice that the front and rear chassis mounting holes (size M4) are
symmetrical.
Figure A-1. NI PXIe-1085 Series Chassis Dimensions (Front and Side)
Dimensions are in inches (millimeters)
0.57
(14.5)
0.39
(9.9)
17.54 (445.5)
6.97
(177.1)
1.93
(49.0)
1.82
(46.3)
2 x 5.63
(142.9)
0.30 (7.62)
17.45 (443.3)
1.34
(34.0)
2 x 3.54
(90.0)
NI PXIe -1085
2 x 1.84
(46.8)
2 x 1.71
(43.5)
2.03
(51.6)
2 x 0.67
(17.1)
14.78 (375.4)
1.82
(46.3)
1.58
(40.1)
12 x M4 x