Appendix A Device-Specific Information
© National Instruments Corporation A-99 E Series User Manual
For a detailed description of each signal, refer to the I/O Connector Signal
Descriptions section of Chapter 1, DAQ System Overview.
PCI-MIO-16E-1
The PCI-MIO-16E-1 is a Plug-and-Play, multifunction AI, AO, DIO, and
TIO device for PCI bus computers.
The PCI-MIO-16E-1 features the following:
• 16 AI channels (eight differential) with 12-bit resolution
• Two AO channels with 12-bit resolution
• Eight lines of TTL-compatible DIO
• Two 24-bit counter/timers for TIO
• A 68-pin I/O connector
Because the PCI-MIO-16E-1 has no DIP switches, jumpers, or
potentiometers, you can easily configure and calibrate it through software.
To Next Page
Loading...
