Chapter 2 Analog Input
© National Instruments Corporation 2-47 E Series User Manual
Getting Started with AI Applications in Software
You can use the E Series device in the following analog input applications:
• Single-Point Analog Input
• Finite Analog Input
• Continuous Analog Input
You can perform these applications through DMA, interrupt, or
programmed I/O data transfer mechanisms. Some of the applications also
use start, reference, and pause triggers.
For more information about programming analog input applications and
triggers in software, refer to the NI-DAQmx Help or the LabVIEW 8.x Help.
To Next Page
Loading...
