National Instruments sbRIO-9607 Getting Started

soware version, visit ni.com/info and enter the Info Code
ipconfigcrio.
Configuring the System in Measurement & Automation
Explorer (MAX)
Complete the following steps to find the system in MAX.
1.
Launch MAX on the host computer.
2.
Expand Remote Systems in the configuration tree and locate your system.
3.
Select your target.
Tip MAX lists the system under the model number followed by the
serial number, such as NI-sbRIO-9607-########.
Setting a System Password
Complete the following steps to set a system password.
Note The default username for the sbRIO-9607 is admin. There is no
default password for the sbRIO-9607, so you must leave the password field
blank when logging in until you set a system password.
1. Right-click your system and select Web Con󽘀guration.
The NI Web-Based Configuration and Monitoring utility opens in your default
browser and is where you set the password. If you have not installed Microso
Silverlight, NI Web-based Configuration & Monitoring prompts you to do so.
2. Enter a unique name for your system in the Hostname field.
3.
Click the Security Con󽘀guration icon.
4.
Click Login.
5.
In the Login dialog box, enter the username admin and leave the password
field blank.
6.
Click OK.
© National Instruments
9
sbRIO-9607 Getting Started

National Instruments sbRIO-9607 Specifications

General

Brand	National Instruments
Model	sbRIO-9607
Category	Computer Hardware
Language	English