Appendix A Device-Specific Information
NI USB-621x User Manual A-10 ni.com
Note For more information about default NI-DAQmx counter inputs, refer to Connecting
Counter Signals in the NI-DAQmx Help or the LabVIEW Help in version 8.0 or later.
USB-6212/6216 Mass Termination Cables and Accessories
This section describes some cable and accessory options for
USB-6212/6216 Mass Termination devices. Refer to
ni.com for other
accessory options including new devices.
Caution For compliance with Electromagnetic Compatibility (EMC) requirements, this
product must be operated with shielded cables and accessories. If unshielded cables or
accessories are used, the EMC specifications are no longer guaranteed unless all
unshielded cables and/or accessories are installed in a shielded enclosure with properly
designed and shielded input/output ports.
Table A-4. Default NI-DAQmx Counter/Timer Pins
Counter/Timer Signal Default Terminal Number (Name)
CTR 0 SRC 37 (PFI 8)
CTR 0 GATE 3 (PFI 9)
CTR 0 AUX 45 (PFI 10)
CTR 0 OUT 2 (PFI 12)
CTR 0 A 37 (PFI 8)
CTR 0 Z 3 (PFI 9)
CTR 0 B 45 (PFI 10)
CTR 1 SRC 42 (PFI 3)
CTR 1 GATE 41 (PFI 4)
CTR 1 AUX 46 (PFI 11)
CTR 1 OUT 40 (PFI 13)
CTR 1 A 42 (PFI 3)
CTR 1 Z 41 (PFI 4)
CTR 1 B 46 (PFI 11)
FREQ OUT 1 (PFI 14)
To Next Page
Loading...
Need help?
General
